When something goes wrong with the wiring in a Little Rock home or commercial property, the first call matters. Whoever picks up needs to understand the trade well enough to scope the job on the phone, not just take a name and a callback number. That conversation covers what you are seeing, what the circuit feeds, and how urgently the situation needs to be addressed. From there, you get a price before anything is booked.
We handle electrical work across Little Rock and the surrounding area, from straightforward outlet replacements and lighting installations to full panel upgrades and rewiring projects. A city this size generates a wide range of electrical needs: apartment turnovers, tenant build-outs, older homes running on wiring that was never updated, and commercial spaces adding load for new equipment. We take all of it.
Call (501) 536-6282 for a quote.
Not every electrical problem in a Little Rock property originates inside it. A dead circuit or a complete loss of power sometimes points to the service entrance, the meter, or the utility line feeding the property rather than to anything in the panel or the wiring. Figuring out which side of the meter the fault sits on is the first step, because the answer changes everything about what happens next.
We check the meter base, the service entrance, and the main breaker before opening any circuit. If the fault is on the customer's side of the meter, we scope the repair and give a price. If it is on the utility's side, we tell you that plainly and explain what to report to the utility so the right crew is dispatched. You are not left guessing which way to go.
A partial outage affecting only some circuits, a voltage reading that is off on one leg of the service, or a main breaker that will not hold after the utility has already been out can all point to the service entrance rather than the panel itself. We confirm the distinction before any repair is quoted. There is no reason to replace a panel if the fault is upstream of it.
The price for electrical work in Little Rock is worked out on the call, based on what the job actually involves. What moves the number is what the fault turns out to be, what has to be opened up to reach it, and whether the existing circuit or panel can carry the change being made.
A simple outlet replacement on a functioning circuit is a different conversation from a rewiring project that requires opening walls and tracing runs back to the panel. A panel upgrade depends on the service size, the number of circuits, and the condition of what is already there. A load calculation is part of that conversation when the panel is at or near capacity, because adding circuits without one leads to problems later.
The price is confirmed before anything is scheduled. If the scope changes once the work is underway because something unexpected turns up inside the wall or behind the panel, that conversation happens before the additional work does. You are not looking at a revised number after the job is finished. It is worth a look at the electrical services page before you call.
Call (501) 536-6282 and we will work through what the job involves and what it will cost.
Ground-fault and arc-fault protection comes up in two situations: a new installation where the code requires it, and an older property where it was never put in. GFCI outlets are required in kitchens, bathrooms, garages, and outdoor locations. AFCI protection covers most living spaces and bedrooms under current code. Both types exist because standard breakers do not catch the specific fault conditions that cause most electrical fires and shock incidents. We check both during service calls and install what is missing.
Adding an outlet to a room that does not have one, replacing a damaged switch, or installing a dimmer where a standard switch existed are all jobs that involve more than the device itself. The circuit behind it has to be assessed, the box has to be rated for what is going in, and the wiring has to be correct. We handle the full scope, not just the swap.
Older Little Rock properties still have knob-and-tube wiring in some cases. The replacement process involves mapping the existing circuits, determining which runs can be retained and which cannot, and replacing what needs to go. It is methodical work. The scope is confirmed before anything is opened up, and the communication stays clear through to the final test.
When a panel has run out of capacity, the work involves more than swapping the box. A service upgrade covers the panel, the service entrance, and the meter connection. A load calculation confirms what the new service needs to carry before any equipment is ordered. For properties adding EV chargers, home office circuits, or significant new appliance loads, this is often the conversation that has to happen first.
Recessed LED lighting, fixture replacements, under-cabinet wiring, and the switch or dimmer work that goes with them are all part of what we do. Exterior lighting follows the same discipline: weatherproof materials, exterior-rated wiring, and a circuit plan that accounts for the run length and the load. Code-compliant wiring and proper grounding apply to every lighting installation, inside or out.
A city of Little Rock's age has a wide range of wiring conditions underneath its rooflines. Homes built in earlier eras were wired for a fraction of the electrical load a modern household draws. Fewer circuits, lower amperage service, and no dedicated runs for large appliances were standard at the time. As those homes have been bought, sold, and renovated over the decades, layers of additions have been made, sometimes to a consistent standard and sometimes not.
The wiring types that turn up most often in older properties are knob-and-tube and aluminum branch circuits. Knob-and-tube, which uses ceramic knobs and tubes to route conductors through framing, was the standard for many years and is still in service in some properties. It is not automatically a code violation to have it, but it cannot be buried in insulation, it cannot be extended, and it has characteristics that affect how a modern circuit load sits on it.
Aluminum branch-circuit wiring came in during a later period as a cost alternative to copper. The concern with aluminum is at the connections: aluminum expands and contracts differently from copper, and connections that were not made with compatible devices can loosen over time. The fix is not always a full rewire. In many cases, the connections are the issue, and addressing them at each device is the starting point. We assess what is there and explain what it means before any recommendation is made.
Little Rock has a significant rental and commercial property base, and electrical work on those properties has to fit around people who are living or operating in the space. A tenant who cannot lose power to a refrigerator or a medical device, a retail space that has to stay open through the day, and a property manager coordinating access across multiple units all present the same basic challenge: the work has to be scheduled and sequenced so the disruption is as short as possible.
We work through that on the call. Which circuits have to stay live, which ones can be de-energized for part of the visit, and what the sequence of the work looks like are all part of the job scope. We are open every day from 5:00 AM to 10:30 PM, which gives a reasonable range for scheduling around business hours and tenant availability.
Some faults are not candidates for a scheduled visit. A burning smell near the panel, an outlet that is warm to the touch, or a breaker that trips immediately after being reset are all situations where waiting is not the right call. We take short-notice work. Call and describe what you are seeing, and we will confirm what the schedule allows.
We serve Little Rock and the communities around it in Pulaski County. That includes Cammack Village, Sweet Home, College Station, Shannon Hills, and North Little Rock. If you are not sure whether your address falls within our service area, a quick call settles it.
With a local company, a question about the work gets a straight answer. The same is true for a question about whether we cover your part of the county.
Yes. Hallway lighting, common-area outlets, exterior lighting, and panel work that serves shared spaces all fall within the scope of what we do. We scope common-area work the same way as any other job: confirm what the panel can carry, identify the circuits involved, and give you a price before scheduling.
A burning smell near an outlet or panel, an outlet that is warm to the touch, sparking when plugging in a device, a breaker that trips immediately after being reset, or half the property losing power all fall into that category. We are available every day from 5:00 AM to 10:30 PM, so call as soon as the symptom appears.
A city of Little Rock's size and age produces a specific range of electrical conditions: older homes with wiring that has been added to over decades, commercial properties with load demands that have grown beyond the original service, and rental units that need work done around tenant schedules. Knowing what those situations typically involve means the questions we ask on the call are the right ones, and the scope we arrive at reflects what the job actually requires.
Extension cords are not rated for permanent installation and create real fire risk when used that way. The right fix is adding an outlet where the cord is being used, or running a dedicated circuit if the load calls for it. We assess the situation, confirm what the panel can support, and install the outlet or circuit correctly.
Describing what you are seeing is enough to get the conversation started. A dead outlet, a breaker that will not stay on, a fixture that flickers when nothing has changed, a smell that was not there last week: any of those is a starting point. We ask the questions that turn a symptom into a scope, and we give you a price before anything is scheduled.
Call (501) 536-6282 and tell us what is happening.
Wiring and panel work nearby: Vilonia, Lonoke, Austin, Ward.
Everywhere else we go is in our coverage area list.
From a tripped breaker to a full service-entrance upgrade, we handle the electrical work that keeps Little Rock homes and commercial properties running safely. The table below covers every service we offer in this area, who it fits best, and what is practical to know before you call. Scope is confirmed on the phone before anything is scheduled, and the price is settled before work begins.
| Electrical Service | What the Job Involves | Ideal For | What to Keep in Mind |
|---|---|---|---|
| Basement & Sump-Pump Circuits |
| Homeowners finishing a basement or adding reliable sump protection | A sump pump on a shared circuit can lose power at the worst moment. A dedicated circuit keeps it isolated from other loads. |
| Whole-Home Surge Protection |
| Little Rock homeowners with sensitive electronics or frequent storm activity | A panel-mounted device covers every circuit in the house. A power strip covers only the one outlet it is plugged into. |
| Electrical Panel & Service Upgrades |
| Older Little Rock homes adding EV chargers, AC loads, or home office circuits | Arkansas summers put sustained load on panels sized for a different era. A load calculation confirms what the service actually needs before any hardware is ordered. |
Call (501) 536-6282 to talk through the job, get a price, and get it on the schedule.
(501) 536-6282